网站首頁   GB 中國國家標準檢索   GB標準關鍵詞 特價英文版GB標準   GB標準檢測及合規性分析 價格和支付方式 聯系我們
 

中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB/T 51363
幹熄焦工程設計標準(中英文版)
Standard for design of coke dry quenching engineering
SN/T 3474-2014
進出口紡織品質量符合性評價方法 服裝 皮革服裝及製品(中英文版)
Quality conformity evaluation method of textiles for import and export. Clothing. Leather garments and leather products
GB/T 34871-2017
智慧變電站繼電保護檢驗測試規範(中英文版)
Inspection specification of protection relay in smart substationt
YD/T 1655-2007
iptv機上盒技術要求(中英文版)
Technical Specification for IPTV-STB
GB/T 35070.4-2018
停車場電子收費 第4部分:關鍵設備檢測技術要求(中英文版)
Parking electronic toll collection—Part 4:Technical specification for key equipment testing
GB/T 13841-1992
電子陶瓷件表面粗糙度(中英文版)
Surface roughness for electronic ceramic parts
GB/T 18569.2-2001
機械安全 減小由機械排放的危害性物質對健康的風險 第2部分:產生驗證程式的方法學(中英文版)
Safety of machinery--Reduction of risks to health from hazardous substances emitted by machinery--Part 2:Methodology leading to verification procedures
JCJ 10-1997
水泥工廠職業安全衛生設計規定(中英文版)
Specification for occupational safety and sanitary design of cement plants
SB/T 231-2013
食品機械通用技術條件 產品的標誌、運輸與儲存(中英文版)
General specifications for food machinery. Rules for product labeling, transporting and storing
GB 12337-2014
鋼制球形儲罐(中英文版)
Steel spherical tanks
GB/T 35480-2017
緊固件 螺栓、螺釘和螺柱預塗微膠囊型粘合層技術條件(中英文版)
Fastener—Steel bolts, screws and studs with microencapsulated adhesive pre-coating technical specification
GB/T 3103.4-2014
緊固件公差 -200℃~+700℃使用的螺栓-螺母連接副(中英文版)
Tolerances for fasteners―Bolt/nut assemblies for service temperatures from -200℃~+700℃
SN/T 1659-2005
進口核電設施檢驗監管規程(中英文版)
To import nuclear facilities inspection and regulatory procedures
QB/T 4567-2013
黑糖(中英文版)
Muscovado sugar
GB/T 15326-1994
旋轉軸唇形密封圈外觀品質(中英文版)
Appearance quality for rotary shaft lip seals
SJ 1013-1975
手柄翻開式鑽模 導柱(中英文版)
Jig opened with handle--Guide pillars
SY/T 6411.1-2008
油氣井用導爆索通用技術條件及檢測方法 第1部分:通用技術條件(中英文版)
General requirements and testing method of detonating cord for oil and gas well. Part 1: General requirements
DL/T 5128-2001
混凝土面板堆石壩施工規範(中英文版)
Specifications for concrete face rockfill dam construction
QB/T 2012-2014
制革機械 通過式磨革機(中英文版)
Leather machines. Through-feed buffing machine
GB/T 23590-2009
氟化鐠釹(中英文版)
Praseodymium-neodymium fluoride
SY/T 0516-2008
絕緣接頭與絕緣法蘭技術規範(中英文版)
Technical code for insulating joint and insulating flange
GB/T 39979-2021
建築室內窗飾產品通用技術要求(中英文版)
General technical specification of indoor window decoration for building
GB/T 6645-2008
用於水泥中的粒化電爐磷渣(中英文版)
Granulated electric furnace phosphorous slag used for cement
SN 0091-1992
出口生羔皮檢驗方法(中英文版)
Method for inspection of raw lamb skinfor export
JT/T 1003.1-2015
城市軌道交通列車駕駛員技能和素質要求 第1部分:地鐵、輕軌和單軌(中英文版)
(Urban rail transit train driver skills and quality requirements - Part 1: subway, light rail and monorail)
SJ 2943-1988
交流數位電壓表通用技術條件(中英文版)
General specification for ac digital voltmeter
SH/T 1774-2012
塑膠 聚丙烯等規指數的測定 低解析度脈衝核磁共振法(中英文版)
Plastics. Determination of isotactic index for polypropylene. Low resolution pulsed NMR spectroscopy
GB 1886.296-2016
食品安全國家標準 食品添加劑 檸檬酸鐵銨(中英文版)
National Food Safety Standard - Food Additives - Ammonium Citrate
JJF 1584-2016
電流互感器伏安特性測試儀校準規範(中英文版)
(Code for calibration of volt - ampere characteristic tester for current transformer)
FZ/T 54082-2015
錦綸6膨體長絲(bcf)(中英文版)
Polyamide 6 bulked continuous filament yarns(BCF)
GB/T 2885.5-2008
礦用窄軌車輛 第5部分: 平板車(中英文版)
Narrow gauge mine cars - Part 5: Flat deck car
JJG 1049-1995
溫度感測器動態回應校準規範(中英文版)
Calibration Specification of Temperature SensorDynamic Response
SJ 20540-1995
艦載類比光發射機通用規範(中英文版)
Transmitters, light signal, analog, fiber optic shipboard, general specification for
NB/T 20050-2011
核電廠電氣設備水危害防護實用方法(中英文版)
Recommended practice for the protection of electric equipment in nuclear power plants from water hazards
GB 25683-2010
鋼液澆包 安全要求(中英文版)
Molten steel ladle - Safety requirements
TB/T 2249-1991
鐵道客車車電配線絕緣電阻測試方法(中英文版)
(Railway passenger car electrical wiring insulation resistance test methods)
GB/T 14480.2-2015
無損檢測儀器 渦流檢測設備 第2部分:探頭性能和檢驗(中英文版)
Non-destructive testing instruments—Equipment for eddy current examination—Part 2:Probe characteristics and verification
GB/T 19709-2005
用於行政、商業和運輸業電子資料交換基於EDI(FACT)報文實施指南的XML schema(XSD)生成規則(中英文版)
Electronic data interchange for administration,commerce and transport-Rules for generation of XML schema(XSD)on the basis of EDI(FACT)message implementation guidelines
HGB 3086-1959
鉻黑T(中英文版)
(Chrome black T)
GB/T 4324.18-2012
鎢化學分析方法 第18部分:鉀量的測定 火焰原子吸收光譜法(中英文版)
Methods for chemical analysis of tungsten - Part 18: Determination of potassium content - Flame atomic absorption spectrometry
SJ/T 11578-2016
led模組電光轉換效率要求(中英文版)
(LED module electro-optical conversion efficiency requirements)
HG/T 3262-2002
工業用四氯乙烯(中英文版)
Tetrachloroethylene for industial ues
GB/T 16705-1996
環境污染類別代碼(中英文版)
Codes for environmental pollution categories
TB/T 3409-2015
動車組用鑄鋁件通用技術條件(中英文版)
General technical specification of aluminum alloy castings for EMU/DMU
GB 9706.245-2020
醫用電氣設備 第2-45部分:乳腺X射線攝影設備和乳腺攝影立體定位裝置的基本安全和基本性能專用要求(中英文版)
Medical electrical equipment—Part 2-45: Particular requirements for the basic safety and essential performance of mammographie X-ray equipment and mammographie stereotactic devices
HG 2014-1991
鋼絲繩牽引難燃輸送帶(中英文版)
(Rope pulling flame retardant conveyor belt)
GB/T 26103.3-2010
GCLD 型鼓形齒式聯軸器(中英文版)
Curved tooth coupling GCLD
GB/T 9771.4-2020
通信用單模光纖 第4部分:色散位移單模光纖特性(中英文版)
Single-mode optical fibres for telecommunication—Part 4: Characteristics of a dispersion shifted single-mode optical fibre
SN/T 4026-2014
日用玻璃產品中鋁、鐵、鈣、鎂、鈉、鉀、鈦、鉛、鎘、矽、鋅、銅的測定 電感耦合等離子體原子發射光譜法(中英文版)
(Daily glass products, aluminum, measuring inductance iron, calcium, magnesium, sodium, potassium, titanium, lead, cadmium, silicon, zinc, copper, coupled plasma atomic emission spectrometry)
CJ/T 171-2016
城鎮環境衛生設施屬性資料獲取表及資料庫結構(中英文版)
(Data Collection Table and Database Structure of Urban Environmental Sanitation Facilities)

找到:115477條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [2149] [2150] [2151] [2152] [2153] [2154] [2155]

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330        info@transcustoms.com 
©  Copyright 2001-2025  RJS MedTech Inc. All Rights Reserved